The characteristics of heirloom quality, stunning and classic and rugged construction are just a few ways to describe an oak bedroom set. Before spending thousands of dollars on a fully assembled game, many customers opt for oak furniture ready to assemble, economical and high quality alternative. Follow a few simple assembly instructions to reinvent your bedroom space with new furniture oak.
Leave the bed for last because it is the largest piece of furniture that occupies the largest amount of floor space. Keep the room as clear as possible and check each box to make sure that all parts and hardware are there. Assembled one piece at a time to avoid mixing parts . Gather the tools : a Phillips head screwdriver and a level, a drill and a hammer be necessary to place the screws in place. Buy a glue for wood of excellent quality for use on all connection joints during assembly.
Assemble the first toilet. Connect back to the two side panels, and then connect the front using screws, pins or other fasteners. Sets all the screws and parts and then apply a drop of wood glue to the top edge of the base of the toilet, which rest on the surface of the toilet. Place dressing on the surface of the base and hold it from below using the specified hardware to connect the two parts . Hold the dressing mirror to the back of the connecting the parts with screws. Assemble individual drawers. This is where the wood glue to be more important, since the drawers receive the greatest stress, opening and closing in everyday use, so it is important to reinforce each joint with wood glue. After screwing and nailing the parts together, use a Phillips screwdriver to attach the handles across the front of the drawers and then them apart to let the glue dry.
Assemble the cabinet in a horizontal position. Start with one of its side walls and Stop it horizontally on its side with its front edge down. This makes it easier to secure the rear panel without first moving unit. Use hardware and wood glue to connect the top of the cabinet to the upper end of the side wall, and then the bottom of one to the bottom of the other. Nailed or screwed the back panel in place all around the edges to close the drive and give it stability. Put the foot and inserts cabinet shelves and drawers assembles and inserts. Connecting doors using hinges and screws holding the handle or knob.
The bedside tables
Because bedside tables are typically equal in a bedroom set, you may want to complete their assembly steps simultaneously. Connect one side of the panel sides top and bottom of the nightstand with the front of the unit face down. Connect the other side and then secures the back using nails or screws. Assemble and insert the drawer or installs or doors, depending on the layout of your bedside table.
Supports the head against the wall, with the hardware of the bed frame out. Screws inserted through the holes of the header and into one end of the frame bar that is the mattress support, with the edge of the mattress support inward. Screw the other bar in place on the other side of the header and check that all nuts and bolts are tight. Hold the foot of the bed while lifting the other end of one of the frames of the mattress support, insert the screw through the holes in the base and within the framework of the mattress support; set screws and nuts. Repeat on the other side and then check that all screws and nuts are tight. Place your mattress on the frame, followed by the mattress and then make the bed with bed linen combined. Rearrange the pieces of oak bedroom furniture on the best places in the room and enjoy your bedroom set for years to come.