How to design metal spiral stairs
Spiral staircases are a component architecture where design and art meet. Spiral staircases are made of steel suitable for indoor and outdoor use, as it will save space on the floor while two floors connected. Can also be used to achieve balconies, attics or terraces. By creating your own, you can customize the angle of the curve and make sure that the structure will have the look you want. Such steps may vary from those who boast soft curves to those that incorporate spiral marked characteristics.
Consider the height between floors or platforms that will connect completed through the stairs, because this will help you determine the number of tracks (surface steps) and risers (raised portions of the steps) you’ll need, as well as the impact generated by the degree of the curve. For example, if you use a spiral staircase in average space (a room square of 13 x 13 feet or 4 x 4 meters), the structure will rotate 240 degrees. If the height between floors is between 76.5 and 85.5 inches (1.94 and 2.17 meters), you’ll need about eight tracks nine risers. If the distance between the platforms is greater than 85.5 inches (2.17 meters), you have to add a footprint and additional riser for every 9.5 inches (24 centimeters) tall. The angle also increase 30 degrees, especially if you are installing a staircase with a spiral marked.
Determines the amount of space you have in the room so you can calculate the diameter of your staircase. If you are adding a spiral staircase to a large entrance hall, you need to have enough space for the development of a broad curve and comfortable to climb. In smaller spaces, however, the curve will always be more just. The length of the traces that are used can also affect the diameter of a spiral staircase.
Choose the type of curve you want to have your steel staircase. Different types of ladders include those whose tracks “radiate” around a central support post. A spiral staircase can be styled “independent” and winding down look sporting a loose and open. A ladder with an elliptical design has no sharp corners to a spiral staircase. Instead, the staircase looks more like a kind of coil stretching.
Design traces. In a spiral steel staircase type can be smooth or have non-skid paint for extra security. In this type of ladder rungs generally fingerprints or are angled at one end and have a wedge shape. If you prefer to have more decorative prints, encárgalas with cutouts or details such watermark. If you choose to use wood fingerprint will still have the light metal as the need actually build frames angled blades to clamp timber. Remember that the tracks should be as wide as possible to ensure the safety of those who use it. The tracks that are too narrow can make it hard you keep your balance when you put your foot to climb.
Design a railing or balustrade. A railing is essential to help ensure the safety of people in your home, especially in the narrow stairs. You can design a steel handrail, glass, wood or wrought iron with handmade decorative details. You can choose a handrail of the same materials as the rail or opt for aluminum, stone or glass. According to the website Winstaco, a leading European manufacturer of stairs, spiral stairs look great when they have a combination of two materials. In the spiral staircases, balusters usually are round, but you can order a rectangular or square . Taper also functions, where each piece has a wide end and a thinner. Winstaco recommends the use of a round baluster railing with minimum 60 mm wide on a spiral staircase, as well as being safer provide a warmer environment, but of course, you can also order them in stainless steel, just do not forget to be provide you the security you need.