Installing an entertainment center can save floor space and use the space on the walls wasted. You have to get rid of the cabinets used ara storage, to create a plan for a desired floor for furniture. The construction of the unit from floor to ceiling and wall to wall, for example, to store the pieces and storage equipment and books. Consider several options before deciding on a final design. Want entertainment center that looks appropriate in the room for the next few years.
Measure the length, width and height that will build unity in a given wall. Do not start building it until you’ve established the design in detail, where the television set, DVD player and other parts are found. Find the best place to place the electrical connections to the unit by luminicidad outlets or media equipment. Place these connections throughout the attic, for example, and within a space provided between the unit and the wall studs. Draw all details on a graph paper and includes spaces in the shelves and walls .
Build the basic size for the structure of the unit and use frameworks 5.08 by 10.10 cm. Locate existing nails in the walls with nails locator. Cut the pieces of the structure to joinery at all miter angles to fit better when the envelope is added. staplers used to adjust all the component parts of the structure. Ensures foil shield to the floor joists, check with a carpenter’s level to make sure the structure is plumb. Used wood spacers, if necessary, to obtain a square structure.
Place electrical connections inside the rear of the cabinet before covering the structure with gypsum board or other materials. Use the conduit to store the connection. Cut gypsum board, veneer or wood panel to align the shelf spaces and sections of the wall of the unit, using a nail and jig saw for drywall. Use wood as a durable material to align the sectors that hold the books. Cover the bottom shelf where the TV is located, using 1.90 cm plywood. Paste veneer on plywood. uses very sharp saw blades for cutting use any coverage, so there will be some minimum along joints openings.
Ends any binding of the gypsum board taping and cover the joints with joint compound. Lija joints gently, so that the joints or cracks in gypsum board are not. Using a joint compound, and sanding plaster joints at least twice, to obtain a coverage works proportionately soft plaster.
Clava crown by molding along the top of the cabinet for an internal appearance. Cut the wood trim to fit around openings for doors that are closed to all miter angles wood trim. Install the pre-made unfinished doors you paint or dye it to match with the unit. using hidden hinges unseen, for a more professional view. Pin the crown molding along the front of the cabinet at floor level ara get an insider look.