Installation of air conditioning
Two devices will place a bomb on the outside and a diffuse inside house, which connect with each other and put a drain to prevent condensation. A very easy job to realize that we will explain below in detail. Lets talk about Installation of air conditioning.
Step by step to install an air conditioning:
Once you have chosen the place where we will place the internal drive, check that the area has no pipes or cables can damage the drill, with the metal detector.
Then present the bracket on the wall, Revelations and mark the attachment points with a pencil.
Drilled holes with the drill and drill bit for concrete the same diameter as the plugs and screws that we will use to attach the bracket; in our case? 6 mm.
With the help of a hammer introduce the anchors.
Substituting the drill for the right tip and set the plate to the wall with screws that already includes the kit.
Now we have to make a through-hole? 65 mm together with the support, as it indicates the manufacturer to remove the tubes connecting to the outside; so we draw a circle with a pencil diameter of the tube using a piece as a template.
Using the drill provided with a drill extra-long Ø 22 mm will make the hole. We will place the indoor unit higher than outdoor unit, so we will make the hole with a slight downward inclination to favor the drainage of condensation.
After emptying the circle with the drill and drill , finish it the work with the help of a hammer and chisel.
To channel tubes and wire electric abroad more easily introduce into the hole a PVC pipe of length equal to the thickness of the wall and with a suitable diameter to the hole we’ve done.
Once you have placed the indoor unit, we will install the outdoor unit. First thing we do is put a channel in front of our house, to conceal the wire and tubing. To do this, we will drill holes with the drill and drill bit for concrete the same diameter as the plugs and screws that we will use to secure it.